RUIJIE RG-AP840-I

RUIJIE RG-AP840-I

Description

Model

 RG-AP840-I

Hardware specifications

Radio

Dual-radio dual-band(2.4G+5G):2.4G 2×2 MIMO + 5G 4×4 MIMO

Protocol

Supports standard 802.11ax, dual-radio dual-band, concurrent 802.11ax and 802.11a/b/g/n/ac

Operating Bands

802.11b/g/n :2.4G ~ 2.483GHz

802.11a/n/ac/ax : 5.150~5.350GHz,5.47~5.725GHz,5.725~5.850GHz (vary depending on different countries)

Spatial Streams

Up to 6: 2×2:2 in 2.4GHz , 4×4:4 in 5GHz

Max Throughput

Maximum throughput of 2.4G: 400Mbps

Maximum throughput of 5G: 4.8Gbps

Maximum throughput per AP: 5.2Gbps

Modulation

OFDM:BPSK@6/9Mbps,QPSK@12/18Mbps,16-QAM@24Mbps,64-QAM@48/54Mbps

DSSS:DBPSK@1Mbps,DQPSK@2Mbps,and CCK@5.5/11Mbps

MIMO-OFDM:BPSK, QPSK, 16QAM, 64QAM, 256QAM and 1024QAM

OFDMA (up to 1024-QAM)

Receiver Sensitivity

11b:-96dBm(1Mbps),-93dBm(5Mbps),-89dBm(11Mbps)

11a/g:-91dBm(6Mbps),-85dBm(24Mbps),-80dBm(36Mbps),-74dBm(54Mbps)

11n:-90dBm(MCS0),-70dBm(MCS7),-89dBm(MCS8),-68dBm(MCS15)

11ac HT20:-88dBm(MCS0), -63dBm(MCS9)

11ac HT40:-85dBm(MCS0), -60dBm(MCS9)

11ac HT80:-82dBm(MCS0), -57dBm(MCS9)

11ax HT80:-82dBm(MCS0), -57dBm(MCS9), -52dBm(MCS11)

11ax HT160:-80dBm(MCS0), -49dBm(MCS11)

Antenna

Integrated antenna design

Antenna Gain

2.4G: 3dBi

5G: 3dBi

Service Ports

3 10/100/1000M Ethernet ports (The LAN1 Port supports PoE in, LAN3 Port supports LAN & IoT module expansion with PoE out)

Management Port

1 console port

USB

1 USB 2.0 port

IoT Capability

BLE

Reset Button

Support

Anti-theft Lock

Support

LED Indicator

1 LED indicator (Supports red, green, blue, orange and flashing mode, which indicates device access. The indicator can be switched off to silent mode.)

Transmit Power

≤100mw(20dBm) (vary depending on different countries)

Adjustable Power

1dBm

Power Supply

Local power supply (DC 48V/1A) (Power adapters are sold separately)

PoE+ (802.3at)

PoE (802.3af) – Not recommended: 5G radio is degraded to 2×2 MIMO, and the PoE out of the LAN3/ IoT port is disabled

Power Consumption

<25.4W
Physical Specifications

Temperature

Operating Temperature: -10°C to 50°C
Storage Temperature: -40°C to 70°C

Humidity

Operating Humidity: 5% to 95% (non-condensing)
Storage Humidity: 5% to 95% (non-condensing)

Installation Mode

Ceiling/wall-mountable

Dimensions (W x D x H)

220mm ×220mm x48.85mm(Height of the AP only, excluding the mount kit)

Weight

1.30kg

IP Rating

IP41

Certifications and Compliance

Safety Standard

GB4943, EN/IEC 60950-1

EMC Standard

GB9254, EN301 489

EN 55032 , EN 61000, EN 55035

Health Standard

EN 62311

Radio Standard

SRRC, EN300 328, EN301 893

Software Specifications

WLAN Maximum clients per AP 1024
BSSID capacity Up to 32
SSID hiding Support
5G Priority (Band Steering) Support
Configuring the authentication mode, encryption mechanism and VLAN attributes for each SSID Support
Remote Intelligent Perception Technology (RIPT) Support
Intelligent device recognition technology Support
Intelligent load balancing based on the number of users or traffic Support
STA control SSID/radio-based
Bandwidth control STA/SSID/AP-based bandwidth control
Data encryption WPA(TKIP), WPA-PSK, WPA2(AES), WPA3, WEP(64/128 bits)
PSK and web authentication Support
PPSK authentication (For Employee) Support (require wireless controller)
802.1x authentication Support
PEAP authentication Support
Data frame filtering Whitelist, static/dynamic blacklist
User isolation Support
Rogue AP detection and countermeasure Support
Dynamic ACL assignment Support
RADIUS Support
CPU Protection Policy (CPP) Support
Network Foundation Protection Policy (NFPP) Support
IP

IPv4 and IPv6 address

Support

Multicast routing

Multicast to unicast conversion

DHCP service

DHCP Snooping, Option 82, Server, Client

Management and Maintenance

Supported wireless LAN controllers

Ruijie WS Series Wireless Controller

Ruijie MACC-Base Software Controller

Ruijie Cloud (Public Cloud)

Management protocol Telnet, SSH, TFTP, Web
Wireless Intelligent AI Optimization Service (WIS) Support
SNMP SNMPV1,V2c,V3
Syslog / Debug Support
FAT/FIT/MACC mode switching Factory default firmware supports FAT (standalone) or FIT mode (WS controller) or MACC mode (Ruijie MACC-Base or Ruijie Cloud) management

 

You've just added this product to the cart: