• Fiber Cleaver

    Single-mode or Multi-mode Use

    Bare fiber diameter 125μm

    Outer coat diameter 250μm~900μm

    Cleaved length 9~18mm

    Cleaved angle < 0.5 degree

    12 Position Rotatable and Replicable Blade

    Provides approximately 36,000 cleaves

    Compact body& light weight; High Precision Cleaves

    By using a rotating blade for multiple scoring positions enables a blade life of 36,000 cleaves with a cleave angle better than 0.5 degrees.

    The unit is constructed to be robust and field serviceable and has options such as tripod mount to enable secure platform mounting.

  • Fiber Optic Stripper

    Used to strip fiber optic cables jacket and coating.

    For use with 125 micron fiber cables.

    Ergonomic handle design reduces hand fatigue

    All cut surfaces are precision mechanical tolerances to ensure clean, smooth operation

    Ergonomically designed handle, comfortable grip

    Factory default, goes without adjustment; will not damage the fiber

    When not in use, locked in the closed blade

  • Fiber Optic Simple Stripper

    Used to strip fiber optic cables coating.

    For use with 125 micron fiber cables.

    The simple stripper is a precision tool necessary for quick and efficient installation of quick assembly connectors.

    The stripper leaves 19.5 mm section of the buffer with a diameter of 250 microns, while the rest of the buffer is removed to the 125 um cladding, without damaging this part of the fiber.

  • FTTH Cable Stripper

    Stripper for 3.1×2.0mm FTTH cables with steel wire.

    Pre-set at the factory – no adjustments needed

    Will not scratch or nick glass fiber

    All stripping surfaces are manufactured to precise tolerances to assure clean, smooth strips

    Ergonomic handle design reduces hand fatigue

    Universal Stripper for 3.1×2.0mm FTTH drop cables with steel wire.

    Made of zinc alloy steel with PVC non-slip handle,Improve cable splicing, more efficient and easy to use.

  • Visual Fault Locator

    Wavelength: 650 nm,

    Universal connector,

    Suitable for multimode and single-mode fibers

    Two operation modes: CW / PULSE

    Visual fault locator is designed to help diagnose problems with fiber optic cabling.

    Its universal connector allows for connecting all 2.5 mm standard fiber-optic connectors (e.g. SC/FC/ST). The locator is designed to test single-mode and multimode optic-fiber cables. The output power of the device is sufficient to test fiber sections up to 5 km long.

    The output signal can be generated in two modes – continuous and pulse – in order to achieve the desired visual effect. The fault locator is equipped with a dust-proof cover, which prevents dust in the connector area. The cap also protects against accidental exposure of eyes.

    In addition to optical path testing, the visual fault locator is an ideal tool for anyone mounting connectors and mechanical splices. After connecting the fault locator to a mechanical splice or connector with transparent body, the installer can control the quality of the connection made and estimate its transmission parameters. No red light in the splice area means a perfect connection.